BMBBM - INTERZINC POWDER, 2411

  • MSDS: BMBBM
  • Manufacturer: INTERNATIONAL PAINT INC
  • Product Name: INTERZINC POWDER, 2411
  • National Stock Number: 8010-00N024221
Product Identification

Product ID:INTERZINC POWDER, 2411
MSDS Date:08/03/1989
FSC:8010
NIIN:00N024221
MSDS Number: BMBBM

Responsible Party
INTERNATIONAL PAINT INC
2270 MORRIS AVE
UNION, NJ 07083-5704
US

Emergency Phone: 800-854-6813

Info Phone: 713-682-1711;800-223-0154

Cage: 26351

Contractor
INTERNATIONAL PAINT INC
HOUSTON, TX 77091 US

Telephone: 800-589-1267/800-854-6813

Cage: 26351

Ingredients

ZINC

CAS: 7440-66-6

RTECS: ZG8600000

Fraction By Weight: 95-100%

OSHA PEL 15 MG/M3 (DUST)

ACGIH TLV: 10 MG/M3 (DUST)

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


ZINC OXIDE

CAS: 1314-13-2

RTECS: ZH4810000

Fraction By Weight: 1-5%

OSHA PEL 15MG/M3 TDUST/5 FUME

ACGIH TLV: 10MG/M3 TDUST; 9293


LEAD

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: 0.150%

OSHA PEL 0.05 MG/M3;1910.1025

ACGIH TLV: 0.15 MG/M3;DUST

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:NONE KNOWN UNLESS OTHERWISE NOTED.
EYES: IRRITATION MAY OCCUR. SKIN: MAY CAUSE IRRITATION. INHALATION:
MAY CAUSE IRRITATION. INGESTION: MAY CAUSE GASTRO-INTESTINAL
IRRITATION.
Explanation of Carcinogenicity:INORGANIC LEAD - IARC GROUP 2B.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:SKIN AND RESPIRATORY CONDITIONS.

First Aid

First Aid:EYES: FLUSH IMMEDIATELY WITH COPIOUS QUANTITIES OF WATER FOR
AT LEAST 15 MINUTES. GET MEDICAL ATTENTION IMMEDIATELY. SKIN:
REMOVE CONTAMINATED CLOTHING, WASH SKIN WITH PLENTY OF SOAP AND
WATER. LAUNDE R CLOTHES BEFORE REUSE. INHALATION: REMOVE TO FRESH
AIR. GIVE ARTIFICIAL RESPIRATION IF NEEDED. GET MED ATTENTION.
INGESTION: CALL PHYSICIAN IMMEDIATELY TO DETERMINE WHETHER OR NOT
TO INDUCE VOMITING.

Fire Fighting

Extinguishing Media:FOAM, CO*2, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
SMOTHER FLAMES W/1 OF ABOVE EXTING MEDIA. CLSD CNTNRS MAY EXPLO
WHEN EXPOS TO EXTREME HEAT. H*2O(SUPP DATA)
Unusual Fire/Explosion Hazard:DRY ZINC DUST FORMS EXPLO MIX W/AIR. MAY
YIELD EXPLO HYDROGEN GAS IN PRESENCE OF MOISTURE, ALKALI OR ACID.
EXPLO MAY OCCUR IF CONTAM W/STRONG OXIDIZING AGENTS.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
INHALATION OF VAPORS. VENTILATE AREA. CLEAN UP WITH ABSORBANT
MATERIALS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN BUILDING DESIGNED AND
PROTECTED FOR STORAGE OF FLAMMABLE POWDERS. AVOID BREATHING DUST OR
CHIPS FROM SANDING OR BLASTING SURFS COATED W/PROD.
Other Precautions:INHAL OF ZINC FUME MAY PRODUCE SYMP KNOWN AS METAL
FEVER. SYMPTOMS USUALLY DISAPPEAR WITHIN 24 HOURS. AS NOTED IN OSHA
LEAD STANDARD, REPEATED AND PROLONGED EXPOSURE MAY CAUSE DELAYED
EFFECTS INVOLVIN G BLOOD, GI, NERVOUS, & REPROD SYSTEMS.

Exposure Controls

Respiratory Protection:IN OUTDOOR/OPEN AREAS, W/UNRESTRICTED VENT, USE
A NIOSH/MSHA APPRVD FILTER RESP TO REMOVE SOLID AIR-BORNE PARTICLES
OF OVERSPRAY DURING SPRAY APPLIC. IN RESTRICTED VENT AREAS, USE A
NIOSH/MSHA APPRVD RESP I/A/W 29 CFR 1910.134 TO (SUP DAT)
Ventilation:PROVIDE SUFF VENT IN VOL & PATTERN TO KEEP TLV & LEL OF HAZ
INGREDS BELOW LIMITS SPECIFIED & TO REMOVE DECOMP(SUPP DATA)
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEM WORK GOG & FULL LGTH FACESHLD
Other Protective Equipment:WEAR APPROPRIATE IMPERVIOUS PROTECTIVE
CLOTHING TO PREVENT SKIN CONTACT.
Work Hygienic Practices:REMOVE AND WASH SOILED CLOTHING BEFORE REUSE.
WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health
FIRE FIGHT PROC: MAY BE USED TO COOL UNOPENED CONTAINERS. RESP PROT:
REMOVE A COMBINATION OF PARTICULATES AND VAPORS. VENT: PRODUCTS
DURING WELDING OR FLAME CUTTING ON SURFACES COATED WITH THIS PRODUC
T.

Chemical Properties

HCC:N1
Vapor Density:HVR/AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:0 (WT)

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:MOISTURE.
Hazardous Decomposition Products:ZINC FUMES, LEAD FUMES.

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.